查看完整版本: [-- ASNT Shanghai Section ASNT上海分会 --]

中华焊接动力网旗下焊接社区 -> 新闻动态 -> ASNT Shanghai Section ASNT上海分会 [打印本页] 登录 -> 注册 -> 回复主题 -> 发表主题

尘土 2016-03-14 16:21

ASNT Shanghai Section ASNT上海分会

Shanghai Section, China Mhu53DT  
On 27 February, the Shanghai Section hosted its spring section meeting. The meeting was held at No 100 Huihe Road Shanghai, China, with 65 members and guests in attendance. The meeting began with Section Chair John Kinsey welcomed everyone and shared his NDT stories. Director Xu Yongchang welcomed all China members in attendance, along with a brief speech of how can the Section benefit to every ASNT member. Later on, Wu Jun presented “YXLON new CT technology”. Liu Bin presented “Development of ASNT Level 3 Certification in China”, Mr. Liu did many researches on the number of each ASNT level 3 certification holder and development in China. Finally, Wang Niu presented “Introduction of ASNT SNT-TC-1A”. Mr. Wang listed all the revision of SNT-TC-1A and highlighted the difference. The meeting was a huge success with providing a bridge between China members and ASNT ISC, the meeting was enjoyed by all. xdFP$Y~ogy  
Lic{'w&  
美国无损检测学会上海分部227号召开了第一次春季会议,会议由中国无损检测学会和卡拓工程管理咨询(上海)有限公司(卡拓)赞助筹办,本次会议出席人数为65人,会议开始由分部主席JohnKinsey发表讲话,首先 Mr.Kinsey 欢迎大家出席会议并介绍了下自己。随后,分部徐永昌常务主任发表了简短的致辞,首先欢迎大家参与加分部活动,同时也希望大家积极参与,最后徐主任给大家介绍了下加入分部如何受益大家。紧接着我们邀请到了来自依视科朗的吴骏介绍其公司最新的CT技术。而后,由来自上海普惠的刘斌先生给做了一个关于“ASNT3级在中国的发展状况和展望“的演讲。刘工做了许多研究,从ASNT历史出发,介绍了ASNT的发展,再到ASNT3级考试在中国的历程,并且详细统计出了ASNT三级持证总人数,各探伤方法持证人员数量,以及持证人数地域分布情况,刘工的演讲深受大家都欢迎。本次会议的最后演讲者为王牛先生,他为大家解读了ASNTSNT-TC-1A ,王工给大家列举了不同版本的SNT-TC-1A的标准并且标出了其中的区别。本会议举办的很成功,分部也为中国会员和ASNT总部架起了沟通的桥梁。 SG(%d^x`R  
[attachment=116499][attachment=116500][attachment=116501][attachment=116502] :>AW@SoTp  
Tb!B!m  

rytwinner 2016-03-14 17:12
同行大聚会。。。

popjoy 2016-03-15 07:37
看到熟面孔了,

wzxzlxz1314 2016-03-15 12:19
老刘在此

muyangreng 2016-03-15 13:17
好样的

muyangreng 2016-03-16 10:32
向各位专家学习新知识

毛一剑 2016-03-16 15:46
赞!

毛一剑 2016-03-16 15:46
顶一个!

毛一剑 2016-03-16 15:47
多多学习!

youlong1008 2016-03-16 17:23
前段时间我们有同事培训取证,ASNT的UT、RT、MT等证,好像是北京的中国检验集团培训的。不知道和这个有没有关系?

andy520 2016-03-29 08:00
顶一个!


查看完整版本: [-- ASNT Shanghai Section ASNT上海分会 --] [-- top --]


中华焊接动力网社区——全球最大焊接社区 ©2005-2011